Windows xp boot process step by step

Wait for the installation to proceed. After the Windows logo goes away, you will see a list of steps remaining on the left side of the screen, and tips for using windows on the right. The time remaining for the installation will be displayed below the list of steps remaining.

It is normal for the screen to flicker, turn on and off, or resize during this process. Choose your language and region settings. During the installation process a dialog window will appear, asking you to choose your Regional settings. Select appropriate settings native to your area. Click the Next button when that is completed. Enter your full name if you want. Enter your Product Key. You will not be able to complete the installation process without a valid Product Key.

Click "Next" to continue. Some versions of Windows will not ask for the Product Key until installation is complete. This will be the name that represents the computer on a network. Windows sets a default name, but you can change it if you would like. You can also set a password for the Administrator account.

This is optional, but recommended for public computers. Select your time zone. Choose your network settings. If you are installing Windows XP in a corporate or academic environment, check with the system administrator, though Typical Settings will most likely work. You can typically leave the workgroup name set to default. Wait for the installation to finalize. This will only take a few minutes, and the computer will reboot when it is finished installing. Once the computer reboots, you will be taken to the Windows XP desktop.

At this point, installation is complete, though there are a few things left to do before Windows is completely usable.. Part 3. Set your display preferences. Once Windows loads, you will be told that Windows will automatically configure your display.

Click OK to start the configuration. Your screen will flash a couple times, and then you will be asked if you can read the box that appears. Set your connection preferences. If your computer is connected to the internet, select your connection type.

Press Next to continue. Activate your copy of Windows. If connected to the Internet, Select "Activate Now. Create Users. After the Activation Process, a window will appear allowing you to select the users for the computer. Enter your name, and the names of others who will be using the machine. Start using Windows. By Isoplanet. More by the author:. Did you make this project? Share it with us! I Made It! Remote Control Light Switch by alanmerritt in Arduino.

Check for Log4j vulnerabilities with this simple-to-use script. TasksBoard is the kanban interface for Google Tasks you've been waiting for. Paging Zefram Cochrane: Humans have figured out how to make a warp bubble. Show Comments. Hide Comments. My Profile Log out. Join Discussion. Add your Comment. BootVisreports no driver delays on my test machine. Click "OK" to continue. Please note that you'll only need the i folder. Instructions for doing so vary wildly from system to system, but generally entail the following:.

Hotkey instructions are generally provided on the screen. Assuming that it is supported as is the case with virtually all modern hardware , promote your USB drive to the primary boot device. Please notice that you can seriously screw up your system by providing incorrect BIOS settings! Depending on the speed of your USB drive, this may take a while. Is the USB device listed and does it have top priority? Have you correctly prepared the USB drive in step one?

Restart the procedure. Does your USB drive properly support being booted from? Try another one! Step 4: Prepping the Hard Disk. You need to make sure that your hard drive is partitioned and formatted properly.